Quebec City Radon Map: Every Home Health Canada Tested, and What It Read

82 homes across Quebec City were long-term tested for radon in the two federal surveys. Every one is a dot on this map, coloured by what it read, with the number of tested homes printed beside every district figure.

The Map

Every dot is one tested house. Zoom in for street names. Shaded districts had no home tested in either survey. This page covers postal districts G1 and G2. The whole province is on the Quebec map.

under 100100 to 147148 to 199200 and aboveno homes tested

82 measurements shown. Dot positions inside a district are illustrative, not addresses. The survey records which district a home was in, never where it stood. Tap any dot for its reading, or any district for its count and median. Rural districts here cover thousands of square kilometres, so a dot in one says very little about any particular corner of it.

Built from Health Canada's published measurements under the Open Government Licence. We do not sell radon testing or mitigation.

What the Numbers Say

16%
of tested Quebec City homes at or above Canada's 200 Bq/m³ action level
62
median reading, Bq/m³
890
highest single reading, in G1T

On 82 tested homes this is too small a sample to rank. For scale, of the 33 places mapped with a hundred or more, Halifax is highest at 35.2% of tested homes at or above the action level and Toronto and the GTA lowest at 2.2%. The spread between houses on one street is bigger than the spread between any two of them.

The Number Changes Depending on Whose Limit You Use

Canada acts at 200 Bq/m³. The United States EPA acts at about 148. The World Health Organization sets a reference level of 100. Applied to the same 82 homes:

16%
at or above Canada's 200
21%
at or above the US EPA's 148
28%
at or above the WHO's 100

Same houses, same measurements. Why the three numbers differ, and which one to use.

By Postal District, with the Sample Sizes Shown

Read the count column before the median column. A district resting on four houses is a hint, not a verdict, and those rows are greyed. The land area column matters too: a district covering ten thousand square kilometres is an average across a region, not a neighbourhood.
DistrictLand km²Homes testedMedianHighestAt or over 200
G1T524598901
G1P1122353981
G1J632213602
G2A2021862791
G1S521802241
G1E1141713642
G1W831672121
G1X1241673001
G1B4221192081
G2L1241083761
G1G1031001570
G1Y64911500
G2G513631160
G1V95611210
G1K45553101
G2K16350670
G2C8539990
G1C21538840
G1H8638740
G1M11338850
G2B15428460
G2E9528500
G1L4324520

0 districts have ten or more tested homes, which is where these figures start to mean something. The districts with no measurement at all are G1N, G1R, G2J, G2M, G2N.

What Actually Settles It

Nothing on this page describes your house. Radon varies enormously between homes on the same street, because it depends on how each building sits on and draws air from the ground beneath it. The highest reading here is 890 Bq/m³ and it sits in a district whose median is far below it. A long-term test in your own home is the only measurement that tells you anything about your home.

Also: every C-NRPP certified radon company here, the other city and province maps, and what radon actually is.

Sources and method. Radon measurements: Health Canada, Radon and Thoron Data From Canadian Homes pooled with the Cross-Canada Survey of Radon Concentrations in Homes 2009-2011, both under the Open Government Licence – Canada. Boundaries: Statistics Canada 2021 cartographic forward sortation area file, same licence. Percentages are calculated from the individual measurements shown, not quoted from a summary. Land areas are from the Statistics Canada boundary file.